TOA Data Conversion
Up one level
CAS developed this driver for a customer who was implementing a Building Control System for a Prison. Their goal was to provide operators and staff to monitor building operations from a coherent single operator interface. The gateway allows operators to initiate and accept calls. It also allows monitoring so the displays could be updated with color changes etc to show which stations were connected and initiating calls. The building system could also use the data to keep log records.
Convert
We have module solutions which allow integration directly into TOA products as well as the stand alone solutions shown bottom right.
Range of Conversion Solutions
Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.
| FS20 Series | 1x RS232/485 | 1x Ethernet | 1x Lonworks | |
| FS25 Series |
2x RS232/485 | 1x Ethernet |
||
| FS30 Series |
2x RS232 and 2x RS485 | 2x Ethernet | 1x Lonworks | FieldBus Support:eg Profibus, DeviceNet etc Hot Standby Support |
| FS40 Series |
10x RS232 and 2x RS485 | 2x Ethernet | 1x Lonworks | FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etc Hot Standby Support |
| SlotServer |
1x RS232/485 |
1x Ethernet | 1x Lonworks | For Rockwell ControlLogix 5600 |
Lonworks and Fieldbus are options not proviced on base models.
Find your protocol
We have a huge list of protocols.
| Web
Building automation Other Categories
|
Industial
|
Industial |
Block Diagram
FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.
Chipkin Automation and TOA
This driver was developed by CAS – Get expert support from day 1 with CAS.
CAS worked with the vendor and integrators at a site in the US to develop and test the driver.
Data Sheets and Manuals
Need Help
TOA Web Site: www.toaelectronics.com
Need more info ? Call or email us.
Metasys® as used in this document is a trademark of Johnson Controls, Inc.