You have two devices in two different buildings on two completely different networks, one that uses the BACnet Arcnet protocol to communicate, while the other one talks Siemens Fire Safety protocol and they need to talk to each other. What do you do?
A FieldServer is a protocol converter or gateway that can communicate in many different protocols and physical layers including BACnet Arcnet protocol and the Siemens Fire Safety protocol. The Fieldserver acts as a middle man between the two devices. It reads data from one device, stores it internally and makes it available to the 2nd device using another protocol. This is how the FieldServer converts BACnet Arcnet data to Siemens Fire Safety data.
It's a simple solution to a common problem that we can help you with.
BACnet Arcnet is part of the ASHRAE’s BACnet family of protocols. It uses the legacy arcnet physical layer which supports star tolologies unlike Ethernet. Arcnet provides reasonable bandwidth. With the help of FieldServer we can set and retrieve BACnet data from your device and make it available to many different devices no matter what protocol they use. The FieldServer can convert BACnet Arcnet to an impressive set of other building automation protocols by acting as a middle man or protocol converter between two different protocols. Talks BACnet Arcnet on one side and anything else on the other. More information, Driver Data Sheet
The Siemens Fire Safety FSI protocol driver can be used to poll a Siemens Fire Safety MXL system, Siemens FireFinder XLS or to emulate a Siemens Fire Safety MXL or XLS system with attached modules. Either configuration only supports the remote monitoring commands which are adequate for remote data and status information collection. More information, Driver Data Sheet
|QuickServer 1010||2x RS485||1x Ethernet|
|QuickServer 1011||1x RS485||1x Ethernet||1x Lonworks|
|QuickServer 1020||1x RS485 1xRS232||1x Ethernet|
|QuickServer 1021||1x RS485 1xRS232||1x Ethernet||1x Lonworks|
|QuickServer Fieldbus||1x RS485||1x Ethernet||M-bus or KNX|
|FS20 Series||1x RS232/485||1x Ethernet||1x Lonworks|
|FS25 Series||2x RS232/485||1x Ethernet|
|FS30 Series||2x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support:eg Profibus, DeviceNet etcHot Standby Support|
|FS40 Series||8x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etcHot Standby Support|
|SlotServer||1x RS232/485||1x Ethernet||1x Lonworks||For Rockwell ControlLogix 5600|
You can purchase some of these items now at ModbusBACnet.com. We keep stock of most gateways and CAS can often ship for next day delivery. Often we need to do due diligence with you, check the number of devices, trunks, points , network routing and many other factors and thus we like a chance to chat to you, learn your project requirements and work with you to provide the most effective solution. Contact us.
With CAS you are purchasing a solution - not a commodity. If you ask CAS to do the gateway configuration for you then you are purchasing a solution from us and we will work with you to pre-configure the device, make changes as you require them, keep a backup of your files and provide support for you and your customer when installation is done.
CAS are famous for a high level of effective and responsive support. We work with you using voice, email and remote desktop applications.
We have the solution that you are looking for, please contact us today.
Do you want a response? Please include your contact info and email address