Allow remote systems to read and write data to Opto 22 devices. Module configuration can also be done by the remote systems. Given these capabilities it’s possible to abandon old control logic based on a PC or similar and implement you control strategy using new controllers and PLCs.
It’s also possible to integrate fire panel, diesel genset, HVAC, sensor, lighting and many other types of data into the Opto system.
We have module solutions which allow integration directly into Optomux Opto22 as well as the stand alone solutions shown bottom right.
Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.
|QuickServer 1010||2x RS485||1x Ethernet|
|QuickServer 1011||1x RS485||1x Ethernet||1x Lonworks|
|QuickServer 1210||1x RS485 1xRS232||1x Ethernet|
|QuickServer 1211||1x RS485 1xRS232||1x Ethernet||1x Lonworks|
|QuickServer Fieldbus||1x RS485||1x Ethernet||M-bus or KNX|
|FS20 Series||1x RS232/485||1x Ethernet||1x Lonworks|
|FS25 Series||2x RS232/485||1x Ethernet|
|FS30 Series||2x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support:eg Profibus, DeviceNet etcHot Standby Support|
|FS40 Series||8x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etcHot Standby Support|
|SlotServer||1x RS232/485||1x Ethernet||1x Lonworks||For Rockwell ControlLogix 5600|
Lonworks and Fieldbus are options not provided on base models.
FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.
The opto22 driver was developed by CAS – Get exert support from day 1 with CAS.
Opto22 Web Site: www.opto22.com
Need more info ? Call or email us.
Metasys® as used in this document is a trademark of Johnson Controls, Inc.