With the ability to read and write data to most McQuay units, the FieldServer driver can be used to connect McQuay Microtech HVAC equipment to remote systems for Building and/or industrial automation. Multiple units can be connected on a single trunk cable. Once connected to a FieldServer, you can utilize any other FieldServer driver to connect the chillers to a remote system. In addition to interfacing to remote systems, FieldServers can be deployed as web servers and we have developed a number of web page interfaces, customized for various customers, that allow monitoring and control.
We have module solutions which allow integration directly into McQuay Microtech equipments as well as the stand alone solutions shown bottom right.
Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.
|QuickServer 1010||2x RS485||1x Ethernet|
|QuickServer 1011||1x RS485||1x Ethernet||1x Lonworks|
|QuickServer 1210||1x RS485 1xRS232||1x Ethernet|
|QuickServer 1211||1x RS485 1xRS232||1x Ethernet||1x Lonworks|
|QuickServer Fieldbus||1x RS485||1x Ethernet||M-bus or KNX|
|FS20 Series||1x RS232/485||1x Ethernet||1x Lonworks|
|FS25 Series||2x RS232/485||1x Ethernet|
|FS30 Series||2x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support:eg Profibus, DeviceNet etcHot Standby Support|
|FS40 Series||8x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etcHot Standby Support|
|SlotServer||1x RS232/485||1x Ethernet||1x Lonworks||For Rockwell ControlLogix 5600|
Lonworks and Fieldbus are options not provided on base models.
FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.
This was developed by CAS for FST – Get exert support from day 1 with CAS.
McQuay Web Site: www.mcquay.com
Need more info ? Call or email us.
Metasys® as used in this document is a trademark of Johnson Controls, Inc.