KNX Gateways

 

KNX- ConvertPage

 

System integration represents a tiny component by value of your sales and yet it often requires a major effort. Let us help your sales effort by reducing this burden.

When a thermostat that works on the KNX has an interface with the BMS that works on KNX there is no need of conversion. But not everyone will be using a BMS on the same protocol as thermostat.

 

Convert

We have module solutions which allow integration directly into KNX as well as the stand alone solutions shown bottom right .

 

Range of Conversion Solutions

 

Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.

QuickServer 1010 2x RS485 1x Ethernet
QuickServer 1011 1x RS485 1x Ethernet 1x Lonworks
QuickServer 1210 1x RS485 1xRS232 1x Ethernet
QuickServer 1211 1x RS485 1xRS232 1x Ethernet 1x Lonworks
QuickServer Fieldbus 1x RS485 1x Ethernet M-bus or KNX
FS20 Series 1x RS232/485 1x Ethernet 1x Lonworks
FS25 Series 2x RS232/485 1x Ethernet
FS30 Series 2x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support:eg Profibus, DeviceNet etcHot Standby Support
FS40 Series 8x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etcHot Standby Support
SlotServer 1x RS232/485 1x Ethernet 1x Lonworks For Rockwell ControlLogix 5600

Lonworks and Fieldbus are options not provided on base models.

 

Block Diagram

KNX Block Diagram2

 

Chipkin Automation and SMA Sunny Webbox

This driver was developed by Chipkin Automation Systems for FST – Get expert support from day 1 with CAS.

 

Data Sheets and Manuals

pdf_icon24Data Sheet-FieldServer Driver- KNX Gateway

pdf_icon24 – Manual – FieldServer Driver – KNX Gateway

If you liked this post;
  • Please consider subscribing to our RSS feed