The FA403 receives communication using a proprietary protocol. If you need to monitor these remotely or integrate real time data from these devices into your HMI, Building Automation or Industrial System then our gateways with support for over 100 protocols will probably provide a solution.
We have module solutions which allow integration directly into Inovonics Armstrong FA403 as well as the stand alone solutions shown bottom right.
Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.
|QuickServer 1010||2x RS485||1x Ethernet|
|QuickServer 1011||1x RS485||1x Ethernet||1x Lonworks|
|QuickServer 1210||1x RS485 1xRS232||1x Ethernet|
|QuickServer 1211||1x RS485 1xRS232||1x Ethernet||1x Lonworks|
|QuickServer Fieldbus||1x RS485||1x Ethernet||M-bus or KNX|
|FS20 Series||1x RS232/485||1x Ethernet||1x Lonworks|
|FS25 Series||2x RS232/485||1x Ethernet|
|FS30 Series||2x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support:eg Profibus, DeviceNet etcHot Standby Support|
|FS40 Series||8x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etcHot Standby Support|
|SlotServer||1x RS232/485||1x Ethernet||1x Lonworks||For Rockwell ControlLogix 5600|
Lonworks and Fieldbus are options not provided on base models.
FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.
The FA403 driver was developed by CAS – Get exert support from day 1 with CAS.
The driver was developed at the request of Boing (Renton)
Armstrong Web Site: www.armstronginternational.com
Need more info ? Call or email us.
Metasys® as used in this document is a trademark of Johnson Controls, Inc.