DNP3 – Serial

  

FieldServer’s are highly configurable devices and can be configured to be both DNP3 masters and slaves. In fact a single FieldServer can be configured to act as both master on one or more ports and as a slave on other ports. This allows you to use a FieldServer as a DNP3 data concentrator. One consequence of the degree of flexibility is that the FieldServer cannot be certified as compliant at any level except for a particular configuration. However, the gateway is fundamentally level 1 compliant and has most of the features and object support required for level 2 compliance.

Any data read using any of FieldServer’s over 110 protocols can be served as DNP3 data and Classes can be constructed in the configuration file to consist of the data sets you want. The driver can read and write data and poll for class data. Most qualifiers and almost all objects and variations are supported.

 

Convert

We have module solutions which allow integration directly into DNP3 as well as the stand alone solutions shown bottom right.

 

Range of Conversion Solutions

Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.

FS20 Series 1x RS232/485 1x Ethernet 1x Lonworks
FS25 Series 2x RS232/485 1x Ethernet
FS30 Series 2x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support:eg Profibus, DeviceNet etcHot Standby Support
FS40 Series 10x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support: eg DH+, MB+, Profibus,
DeviceNet etcHot Standby Support
SlotServer 1x RS232/485 1x Ethernet 1x Lonworks For Rockwell ControlLogix 5600

Lonworks and Fieldbus are options not proviced on base models.

 

Block Diagram

FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.

 

Chipkin Automation and DNP3

This driver was developed for FieldServer by Chipkin Automation Systems. Get expert configuration and support from day 1.

 

Data Sheets and Manuals

Data Sheet – FieldServer Driver – Serial – FS-8700-47 – DNP 3.0

Manual – FieldServer Driver – Serial – FS-8700-47 – DNP 3.0

More Data Sheets

 

Need Help

DNP3 Web Site: www.dnp.org

Need more info ? Call or email us.

Metasys® as used in this document is a trademark of Johnson Controls, Inc.

If you liked this post;
  • Please consider subscribing to our RSS feed