QuickServer – SNMP to JCI Metasys N2

  

FS-QS-1010-0150 QuickServer – SNMP – JCI Metasys N2

The FS-QS-1010-0150 QuickServer provides a cost-effective, easy to use interface from SNMP to JCI Metasys N2. The QuickServer is delivered with both drivers preloaded and ready to be configured using the provided instructions and software.

 

QuickServer Key Features:

  • Ability to interface up to 250 points of common BAS protocols
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • Flat panel mount standard, DIN rail mount option
  • DIP switches to select baud rate or node ID on the fly

 

SNMP driver:

  • The client can be configured to read values specified by their SNMP Object Identifiers (OID’s), which are defined in the MIB file (Management Information Base) of the target device. The FieldServer MIB file sets out the OID’s to use. The FieldServer Enterprise ID is 6347. MIB files are generated automatically from the FieldServer configuration files. A selection of standarad MIB-2 OID’s are supported to allow interaction with popular Network Management packages.
  • When acting as a SNMP Agent (server) the SNMP driver allows SNMP Get and Set commands to access Data Arrays using the Integer type. The SNMP v1 protocol does not make provision for Floats
  • Driver type: Client or Server
  • Connection type: Ethernet 10Base-T, 100Base-T
  • Data types supported:
    • INTEGER
    • OCTET_STREAM
    • TIMER_TICKS
    • STRING

 

JCI Metasys N2 driver:

  • Supports communication with following devices or classes of devices when acting as a Client
    • N2OPEN-compliant devices
    • VMA 1400 series
    • DX9100 and XT9100
  • Driver type: Client or Server
  • Connection type: RS-485 (two wire, half duplex)
  • Baud rates: 9600
  • Devices tested:
    • UNT
    • VMA1410,
    • VMA1420
    • DX9100 with XT9100 extension
    • NCM (FieldServer as N2Open server)
    • VAV
    • AHU
    • VND

 

Block Diagram


Metasys® as used in this document is a trademark of Johnson Controls, Inc.

If you liked this post;
  • Please consider subscribing to our RSS feed