QuickServer Enhanced – LonWorks

QuickServer_1011

FS-QS-1211 Series

 

FS-QS-1211 Series QuickServer Enhanced – LonWorks

The FS-QS-1211 Series QuickServer is available to use any Serial, Ethernet or LonWorks driver in the extensive FieldServer driver library. The FS-QS-1211 Series can handle up to 500 points and is available with a choice of RS-485, RS-232 or RS-422 serial ports, or KNX, in addition to Ethernet and LonWorks.

 

  • Ability to interface up to 500 points of common BAS protocols
  • BTL Mark – FS-QS-121X Series
  • LonMark Certified – FS-QS-12X1 Series
  • BACnet COV support for fast data communication while reducing traffic over a BACnet network
  • Capacity of 500 LonWorks network variables – almost 5 times more than competition – FS-QS-12X1 Series
  • RS-232 or RS-422 serial port options
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • External DIP switches and LED lights to aid in easy set-up and operation
  • Flat panel mount standard, DIN rail mount option
  • DIP switches to select baud rate or node ID on the fly

 

Specifications

Environment:

  • Operating temperature: -40 to 75 degree C (-40 to 167 degree F)
  • Relative humidity: 5-90% RH non-condensing
Power Requirements
  • 9-30 VDC or 12-24 VAC
  • Current draw @ 12V
  • FS-QS-1010, FS-QS-12X0: 150 mA
  • FS-QS-1011, FS-QS-12X1: 279 mA
Physical Dimensions (HxWxD)
  • 4.5 x 2.9 x 1.6 in. (11.5 x 7.4 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)
Other
  • Configuration/Diagnostic utilities
  • Capacity: 250 points FS-QS-11XX(500 points FS-QS-12XX)
  • Table, Wall or DIN rail mount
Communication
  • Baud: 4800, 9600, 19200, 38400, 57600, 115200
  • Start Bit: 7, 8
  • Stop Bit: 1, 2
  • Parity: Even, Odd, None
Approvals
  • TUV approved to UL 916 and CSA C22.2 standards
  • BTL Mark
  • LonMark Certified (FS-QS-1011 and FS-QS-12X1)
  • RoHS Compliant
  • GOST-R Certified
  • CE and FCC

Block Diagram

QuickServer_diagram

If you liked this post;
  • Please consider subscribing to our RSS feed