QuickServer – Modbus TCP to SNMP

FS-QS-1010-0248 QuickServer – Modbus TCP – SNMP

The FS-QS-1010-0248 QuickServer provides a cost-effective, easy to use interface from Modbus TCP to SNMP. The QuickServer is delivered with both drivers preloaded and ready to be configured using the provided instructions and software.


QuickServer Key Features:

  • Ability to interface up to 250 points of common BAS protocols
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • Flat panel mount standard, DIN rail mount option
  • DIP switches to select baud rate or node ID on the fly


Modbus TCP driver:

  • Driver type: Client or Server
  • Connection type: Internet Protocol (IP), 10/100BaseT
  • Commands supported:
    • 01 – Read Discrete Output Status (0xxxx)
    • 02 – Read Discrete Input Status ((1xxxx)
    • 03 – Read Output Registers (4xxxx)
    • 04 – Read Input Registers (3xxxx)
    • 05 – Force Single Coil (0xxxx)
    • 06 – Preset Single Register (4xxxx)
    • 15 – Force Multiple Coils (0xxxx)
    • 16 – Preset Multiple Registers (4xxxx)
    • EX – Exception Status
    • FF – FIFO
  • Data Types
    • ASCII – 8-bit character
    • Digital – Digital
    • Float – 32-bit IEEE floating point
    • Long – Unsigned 32-bit integer
    • Signed – Signed 16-bit integer
    • Slong – Signed 32-bit integer
    • Unsigned – Unsigned 16-bit integer


SNMP driver:

  • The client can be configured to read values specified by their SNMP Object Identifiers (OID’s), which are defined in the MIB file (Management Information Base) of the target device. The FieldServer MIB file sets out the OID’s to use. The FieldServer Enterprise ID is 6347. MIB files are generated automatically from the FieldServer configuration files. A selection of standarad MIB-2 OID’s are supported to allow interaction with popular Network Management packages.
  • When acting as a SNMP Agent (server) the SNMP driver allows SNMP Get and Set commands to access Data Arrays using the Integer type. The SNMP v1 protocol does not make provision for Floats
  • Driver type: Client or Server
  • Connection type: Ethernet 10Base-T, 100Base-T
  • Data types supported:
    • STRING


Block Diagram

If you liked this post;
  • Please consider subscribing to our RSS feed