QuickServer – BACnet MS/TP to SNMP

FS-QS-1010-0694 QuickServer – BACnet MS/TP to SNMP

The FS-QS-1010-0694 QuickServer provides a cost-effective, easy to use interface from BACnet MS/TP to SNMP. The QuickServer is delivered with both drivers preloaded and ready to be configured using the provided instructions and software.


QuickServer Key Features:

  • BACnet Testing Laboratory (BTL) Mark
  • Ability to interface up to 250 points of common BAS protocols
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • Flat panel mount standard, DIN rail mount option
  • DIP switches to select baud rate or node ID on the fly


BACnet MS/TP driver:

  • Driver type: Client or Server
  • Data Link layer: MS/TP master (Clause 9), baud rate up to 38.4 Kbps, MS/TP slave (Clause 9), baud rate up to 38.4 Kbps
  • Connection type: RS-485 (two wire, half duplex)
  • Baud rates: 9600, 38400, 76800
  • BACnet COV support for fast data communication while reducing traffic over a BACnet network
  • Data types supported:
    • AI – Analog Input Object
    • AO – Analog Output Object
    • AV – Analog Value Object
    • BI – Binary Input Object
    • BO – Binary Output Object
    • BV – Binary Value Object
    • MI – Multi-state Input Object
    • MO – Multi-state Output Object
    • MV – Multi-state Value Object


SNMP driver:

  • The client can be configured to read values specified by their SNMP Object Identifiers (OID’s), which are defined in the MIB file (Management Information Base) of the target device. The FieldServer MIB file sets out the OID’s to use. The FieldServer Enterprise ID is 6347. MIB files are generated automatically from the FieldServer configuration files. A selection of standarad MIB-2 OID’s are supported to allow interaction with popular Network Management packages.
  • When acting as a SNMP Agent (server) the SNMP driver allows SNMP Get and Set commands to access Data Arrays using the Integer type. The SNMP v1 protocol does not make provision for Floats
  • Driver type: Client or Server
  • Connection type: Ethernet 10Base-T, 100Base-T
  • Data types supported:
    • STRING


Block Diagram


If you liked this post;
  • Please consider subscribing to our RSS feed