Veeder Root – Modbus and BACnet and HTML

This CAS driver was developed by Chipkin Automation Systems. Get expert support faster when you use Chipkin Automation Systems.

Originally developed for the 350 series the driver has been tested on both 300 and 450 systems. We can convert any data to most other protocols and the driver supports system , in tank, inventory and system reports. Control functions such as reset are also supported.

Convert

We have module solutions which allow integration directly into Veeder-Root products as well as the stand alone solutions shown bottom right.

 

Range of Conversion Solutions

Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.

FS20 Series 1x RS232/485 1x Ethernet 1x Lonworks
FS25 Series 2x RS232/485 1x Ethernet
FS30 Series 2x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support:eg Profibus, DeviceNet etc
Hot Standby Support
FS40 Series 10x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etc
Hot Standby Support
SlotServer 1x RS232/485 1x Ethernet 1x Lonworks For Rockwell ControlLogix 5600

Lonworks and Fieldbus are options not proviced on base models.

 

 

Block Diagram

2700-02

 

 

Chipkin Automation and Veeder-Root

The Veeder Root driver was developed by Chipkin Automation Systems. We know this protocol to source code level – get expert support and configuration from day 1.

 

Data Sheets and Manuals

Data Sheet – CAS-2700-02 – Veeder Root TLC300/350/450 Gateway – Modbus and BACnet and HTML(Web)
Manual – CAS-2700-02 – Veeder Root TLC300/350/450 Gateway – Modbus and BACnet and HTML(Web)

 

Need Help

Veeder-Root Web Site: www.veeder.com

Need more info ? Call or email us.

Metasys® as used in this document is a trademark of Johnson Controls, Inc.

If you liked this post;
  • Please consider subscribing to our RSS feed