Quadlogic meters support a Modbus RTU Interface using RS232/RS485. No other protocol is supported. We have solutions which can map the meter data onto other protocols so you can monitor power and energy data using other systems. Our solutions allow multiple trunks of meters / closets to be connected to a single gateway. Trunks can have multiple units installed. Our Modbus solutions also allow multi-master configurations, so if you already have one system talking to the meters using Modbus RTU you can still add a gateway and have both our gateway and the other system act as masters. We can also provide an embedded web server with pages that display current data.
We have module solutions which allow integration directly into Quadlogic products as well as the stand alone solutions shown bottom right.
Range of Conversion Solutions
Depending on project requirements select from units with varying resources and multi port devices. OEM and embedded solutions too.
|FS20 Series||1x RS232/485||1x Ethernet||1x Lonworks|
|FS25 Series||2x RS232/485||1x Ethernet|
|FS30 Series||2x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support:eg Profibus, DeviceNet etc
Hot Standby Support
|FS40 Series||10x RS232 and 2x RS485||2x Ethernet||1x Lonworks||FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etc
Hot Standby Support
|SlotServer||1x RS232/485||1x Ethernet||1x Lonworks||For Rockwell ControlLogix 5600|
Lonworks and Fieldbus are options not proviced on base models.
FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.
Chipkin Automation and Quadlogic
CAS has invested time to work with QMC, the British Columbia distributor of Quadlogic products to test and prove the mappings from the QLC meters. Testing was performed using QMC’s calibration test bench.
Data Sheets and Manuals
Quadlogic Web Site: www.quadlogic.com
Need more info ? Call or email us.
Metasys® as used in this document is a trademark of Johnson Controls, Inc.