OMRON Converters

There are two ways we can help you with Omron FINS. Firstly we can help you connect foreign systems to your Omron PLC such as fire alarm systems, gas sensors, HVAC equipment, building automation systems etc. This way you can use your PLC’s to control and monitor these devices without having to implement a hard wired solution. Secondly we can help your control or building automation system monitor and control data in an Omron PLC. In both modes our gateway can act as a client and server or combination. Omron data can be read and written.

 

Convert

We have module solutions which allow integration directly into OMRON products as well as the stand alone solutions shown bottom right.

 

Range of Conversion Solutions

Depending on project requirements select from units with varying resources and multi port devices. OEM and embedded solutions too.

FS20 Series 1x RS232/485 1x Ethernet 1x Lonworks
FS25 Series 2x RS232/485 1x Ethernet
FS30 Series 2x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support:eg Profibus, DeviceNet etc
Hot Standby Support
FS40 Series 10x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etc
Hot Standby Support
SlotServer 1x RS232/485 1x Ethernet 1x Lonworks For Rockwell ControlLogix 5600

Lonworks and Fieldbus are options not proviced on base models.

 

Block Diagram

FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.

 

 

 

Data Sheets and Manuals

Data Sheet – FieldServer Driver – Serial – FS-8704-16 – Omron FINS

Manual FieldServer Driver – Serial – FS-8704-16 – Omron FINS

More Data Sheets

 

Need Help

OMRON Web Site: www.omron.com

Need more info ? Call or email us.

Metasys® as used in this document is a trademark of Johnson Controls, Inc.

If you liked this post;
  • Please consider subscribing to our RSS feed