Mircom FX2000 Data Conversion

Connect your Mircom FX2000 panel to remote system for monitoring and display using a FieldServer gateway. FieldServer supports over 100 protocols. Remote monitoring allows you to integrate the data into a site wide HMI or automation system so your operators / janitors only have to deal with one interface. Normal annunciator panels provide limited zone/group displays. Use this interface to see details. CAS can also develop and customize web pages, served from the same FieldServer to display real time data from the panel. The panel sends messages when events occur. This means the data in out gateway is always up to date.

 

Convert

We have module solutions which allow integration directly into Microm products as well as the stand alone solutions shown bottom right.

 

Range of Conversion Solutions

Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.

 

FS20 Series 1x RS232/485 1x Ethernet 1x Lonworks
FS25 Series 2x RS232/485 1x Ethernet
FS30 Series 2x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support:eg Profibus, DeviceNet etc
Hot Standby Support
FS40 Series 10x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etc
Hot Standby Support
SlotServer 1x RS232/485 1x Ethernet 1x Lonworks For Rockwell ControlLogix 5600

Lonworks and Fieldbus are options not proviced on base models.

 

Block Diagram

FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.

 

Chipkin Automation and Mircom

This  driver was developed by CAS – Get expert support from day 1 with CAS.

CAS worked with the vendor and a pulp mill in British Columbia to develop and test the driver.

 

Data Sheets and Manuals

Manual - FieldServer Driver – Serial – FS-8705-16 – Mircom FX2000 Fire Alarm Panel (Doc Rev 0)

Manual - FieldServer Driver – Serial – FS-8705-16 – Mircom FX2000 Fire Alarm Panel (Doc Rev. 2)

Data Sheet – FieldServer Driver – Serial – FS-8705-16 – Mircom FX2000 Fire Alarm Panel

Manual – FieldServer Driver – Serial – FS-8705-17 – Mircom PRO2000 Fire Alarm Panel

Data Sheet – FieldServer Driver – Serial – FS-8705-17 – Mircom PRO2000 Fire Alarm Panel

More Data Sheets

 

Need Help

Mircom Web Site: www.mircom.com

Need more info ? Call or email us.

Metasys® as used in this document is a trademark of Johnson Controls, Inc.

If you liked this post;
  • Please consider subscribing to our RSS feed