FS-8700-62 - J-BUS
Up one levelFieldServer Driver - Serial
 |
FieldServer Driver - Serial
FS-8700-62
J-BUS
Description
The J-Bus driver supports connections over RS-232 and RS-485 (Half Duplex). The FieldServer can be configured as a client or server using the J-Bus protocol.
|
Fieldserver Mode |
Nodes |
Comments |
|
Client |
1 - 255 |
J-Bus station Address of the node(s) |
|
Server |
1 - 255 |
J-Bus station Address of the node(s) |
Formal Driver Type
J-Bus is a Serial protocol that can be used for a Client or Server transactions.
Compatibility Matrix
|
FieldServer Model |
Compatible with this driver |
|
FS-X2010 |
Yes (Using P1 or R1) |
|
FS-X2011 |
Yes (Using P1 or R1) |
|
FS-X40 |
Yes |
|
FS-X30 |
Yes |
Connection Information*
|
Connection type: |
RS-232 or RS-485 |
|
Baud Rates: |
110; 300; 600; 1200; 2400; 4800; 9600; 19200; 28800; 38400; 57600; 115200 Baud |
|
Data Bits: |
7,8 |
|
Stop Bits: |
1 |
|
Parity: |
Odd, Even, None, Mark, Space |
|
Multidrop Capability |
Yes (For RS-485) |
Devices tested
|
Device |
Tested (FACTORY, SITE) |
|
MGE UPS |
Site |
Connection configurations
No connection diagram possible (multiple unknown connections supported)
Communications functions – Supported Functions at a Glance
Data Types Supported
|
FieldServer Data Type |
Description (or Device Data Type) |
|
Analog Input |
FLOAT, UInt16, SInt16 , Byte |
|
Digital Input |
BIT, , Packed_Bit, |
|
Analog Register |
FLOAT, UInt16, SInt16 , Byte |
|
Digital Output |
BIT, , Packed_Bit, |
Read Operations supported
|
FieldServer as a Client (Function code) |
FieldServer as a Server (Function code) |
|
(1) – Read coil status |
(1) – Read coil status |
|
(2) – Read input status |
(2) – Read input status |
|
(3) – Read holding registers |
(3) – Read holding registers |
|
(4) – Read input registers |
(4) – Read input registers |
|
(11) – Fetch comm Event (Write not supported) |
(11) – Fetch comm Event (Write not supported) |
Write (Control) Operations supported
|
FieldServer as a Client |
FieldServer as a Server |
|
(5) – Force single coil |
(5) – Force single coil |
|
(6) – Preset single register |
(6) – Preset single register |
|
(10) – Poll 484 (Modicon 484 device) |
(10) – Poll 484 (Modicon 484 device) |
|
(15) – Force multiple coils |
(15) – Force multiple coils |
|
(16) – Preset multiple registers |
(16) – Preset multiple registers |
|
(126) – Force single Coil-127 (Only for coil 127) |
(126) – Force single Coil-127 (Only for coil 127) |
Unsupported Functions and Data Types
|
Function |
Reason |
|
Programming messages |
FieldServer is a data transfer device, and as such, programming messages are not required |
|
(07) – Read Exception status |
|
|
(08-xx) – Diagnostic Sub-functions |
|
|
(12) – Fetch comm event log |
|
|
(17) – Report Slave_ID |
|
|
(20) – Read general reference |
|
|
(21) – Write general reference |
|
|
(22) – Mask 4× register |
|
|
(23) – Read/Write 4× register |
|
|
(24) – Read FIFO Queue |
|
THIS PAGE INTENTIONALLY LEFT BLANK