Chipkin.com

Navigation
CAS Modbus TCP Parser.

Have you ever needed to analyze a series of Modbus TCP message?
CAS Modbus TCP Parser

CAS Modbus RTU Parser.

Have you ever needed to analyze a Modbus RTU message?
CAS Modbus RTU Parser

CAS BACnet Explorer

Do you want to know more about your BACnet device on your network ?
CAS BACnet Explorer

Subscribe to our Newsletter
Name
E-mail Address

FS-8700-60 - Gardner Denver Auto Sentry ES / RS2000

Up one level

FieldServer Driver - Serial

FS-8700-60

Gardner Denver Auto Sentry ES / RS2000

Description

The Gardner Denver Auto Sentry ES / RS2000 driver allows the FieldServer to transfer data  from devices over either RS-232 or RS-485 using Gardner Denver Auto Sentry ES / RS2000 protocol.  The driver can be set to communicate with ES controllers with software versions V2.0X, V2.1X and RS2000 controllers.

 

The client driver implements the following functionality:

· Polls controllers for service and maintenance data.

· Polls controllers for operating mode data.

· Polls controllers for operating data.

 

Fieldserver Mode

Nodes

Comments

Client

1

A client node can communicate with up to 8 controllers

 

Formal Driver Type

Serial

Client Only

Compatibility Matrix

FieldServer Model

Compatible with this driver

FS-B2010

Yes

FS-B2011

Yes

FS-B40

Yes

 

Connection Information

Connection type:

RS-232 or RS-485 (Two wire, Half-Duplex)

Baud Rates:

1200; 9600; Baud

Data Bits:

7,8

Stop Bits:

1,2

Parity:

Odd, Even, None

Multidrop Capability

Yes

Devices tested

 

Device

Tested (FACTORY, SITE)

AUTO Sentry ES

Site

RS2000

Site

 

Connection configurations

 

Connection Notes

None

 

 

 

 

 

 

 

 

 

 

 

 

 

Communications functions - Supported functions at a glance:

 

Read Operations supported

FieldServer as a Client

Read Service and Maintenance Data

  • Advisories
  • Shutdown codes
  • Total runtime hourmeter readings @ shutdown codes
  • Current total runtime hourmeter reading
  • Current loaded runtime hourmeter reading
  • Current temp hourmeters
  • Stored temp hourmeters
  • Last maintenance A
  • Last maintenance B
  • Oilage

Read Operating Mode Data

  • Operating mode indication
  • * Sequence number
  • * Unit operating state

 

* Only RS2000 & ES V2.10 and later software versions

Read Operating Data

  • System pressure
  • Filter pressure
  • Discharge temperature
  • Reservoir temperature
  • * Motor current

 

* Not for RS2000

 

Unsupported Functions and Data Types

Function

Reason

Programming messages

FieldServer is a data transfer device, and as such, programming messages are not required

 

 

 

 

 

 

Revision History

 

Date

Resp

Format

Driver Ver.

Doc.

Rev.

Comment

6/19/02

 

 

1.00a

0

Releasing

8/14/03

JD

 

1.00a

1

Releasing

4/09/04

DR

DR

1.02a

2

Updated with other controllers supported

6/12/04

DR

DR

1.02a

3

Updated connection diagram

12/29/04

JD

 

1.02a

4

Releasing