FS-8700-127 - Hanning & Kahl HCS-R
Up one level
FieldServer Driver
FS-8700-127
Hanning & Kahl HCS-R
Description
The Hanning & Kahl HCS-R driver allows the transfer of data from devices over RS-232 HCS-R protocol. Data is read from HCS-R and current data stored in a specified memory area. The driver can store the data with its loop data status distinct memory areas depending on whether the data is on loop or from loop. The driver is based on section 10.5 of Hanning & Kahl - part number 40801121. The FieldServer can act as a Client or Server.
|
Fieldserver Mode |
Nodes |
Comments |
|
Client |
1 |
Only 1 virtual client per port allowed on multidrop systems, |
|
Server |
1 |
This is a protocol limit. |
Formal Driver Type
Serial
Client or Server
Compatibility Matrix: Some devices may require a RS-485/RS-232 Converter
|
FieldServer Model |
Compatible with this driver |
|
FS-x2010 |
Yes |
|
FS-x2011 |
Yes |
|
FS-x30 |
Yes |
|
FS-x40 |
Yes |
Connection Information
|
Connection type: |
RS-232 |
|
Baud Rates* |
9600 (Vendor limitation) |
|
Data Bits* |
8 (Vendor limitation) |
|
Stop Bits:* |
1 (Vendor limitation) |
|
Parity:* |
None (Vendor limitation) |
|
Multidrop Capability* |
Yes |
Devices tested
|
Device |
Tested (FACTORY, SITE) |
|
HCS-R-R" - part # "44.745.033 |
Site |
Connection configurations
Hardware Connection Tips / Hints
1. Loop back RTS CTS if it is required by the other device.
Communications functions - Supported functions at a glance:
Data Types Supported
|
FieldServer Data Type |
Description (or Device Data Type) |
|
Digital Input |
Data bits |
|
Loop number and loop Status |
Read Operations supported
|
FieldServer as a Client |
FieldServer as a Server |
|
|
|
|
Poll ( including Sync and Acknowledge) |
Response along with loop number and status |
Write (Control) Operations supported
|
FieldServer as a Client |
FieldServer as a Server |
|
N/A |
N/A |
Special Operations supported
|
FieldServer as a Client |
FieldServer as a Server |
|
N/A |
N/A |
Unsupported Functions and Data Types
|
Function |
Reason |
|
None |
|
Unsupported Devices or Protocol Options
|
Device |
Details |
|
none |
|
THIS PAGE INTENTIONALLY LEFT BLANK