FS-8700-127 – Hanning & Kahl HCS-R

FieldServer Driver

FS-8700-127

Hanning & Kahl HCS-R

 

Description

The Hanning & Kahl HCS-R driver allows the transfer of data from devices over RS-232 HCS-R protocol. Data is read from HCS-R and current data stored in a specified memory area.  The driver can store the data with its loop data status distinct memory areas depending on whether the data is on loop or from loop.  The driver is based on section 10.5 of Hanning & Kahl – part number 40801121.  The FieldServer can act as a Client or Server.

 

Fieldserver Mode Nodes Comments
Client 1 Only 1 virtual client per port allowed on multidrop systems,
Server 1 This is a protocol limit.

 

Formal Driver Type

Serial

Client or Server

 

Compatibility Matrix: Some devices may require a RS-485/RS-232 Converter

FieldServer Model Compatible with this driver
FS-x2010 Yes
FS-x2011 Yes
FS-x30 Yes
FS-x40 Yes

 

Connection Information

Connection type: RS-232
Baud Rates* 9600 (Vendor limitation)
Data Bits* 8 (Vendor limitation)
Stop Bits:* 1 (Vendor limitation)
Parity:* None (Vendor limitation)
Multidrop Capability* Yes

 

Devices tested

Device Tested (FACTORY, SITE)
HCS-R-R” – part # “44.745.033 Site

 

Connection configurations

 

Hardware Connection Tips / Hints

1. Loop back RTS CTS if it is required by the other device.

 

Communications functions – Supported functions at a glance:

Data Types Supported

FieldServer Data Type Description (or Device Data Type)
Digital Input Data bits
Loop number and loop Status

 

Read Operations supported

FieldServer as a Client FieldServer as a Server
Poll ( including Sync and Acknowledge) Response along with loop number and status

 

Write (Control) Operations supported

FieldServer as a Client FieldServer as a Server
N/A N/A

 

Special Operations supported

FieldServer as a Client FieldServer as a Server
N/A N/A

 

Unsupported Functions and Data Types

Function Reason
None

 

Unsupported Devices or Protocol Options

Device Details
none


 

 

THIS PAGE INTENTIONALLY LEFT BLANK

If you liked this post;
  • Please consider subscribing to our RSS feed