DNP3 Converters

Up one level

FieldServer’s are highly configurable devices and can be configured to be both DNP3 masters and slaves and in fact a single FieldServer can be configured to act as both master on one or more ports and as a slave on other ports. This allows you use a FieldServer as a DNP3 data concentrator. One consequence of the degree of flexibility is that the FieldServer cannot be certified as compliant at any level except for a particular configuration. However, the gateway is fundamentally level 1 compliant and has most of the features and object support required for level 2 compliance.

Any data read using any of FieldServer’s over 110 protocols can be served as DNP3 data and Classes can be constructed in the configuration file to consist of the data sets you want. The driver can read and write data and poll for class data. Most qualifiers and almost all objects and variations are supported.

Convert

We have module solutions which allow integration directly into DNP3 as well as the stand alone solutions shown bottom right.

Range of Conversion Solutions

Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.

FS20 Series	1x RS232/485	1x Ethernet	1x Lonworks
FS25 Series	2x RS232/485	1x Ethernet
FS30 Series	2x RS232 and 2x RS485	2x Ethernet	1x Lonworks	FieldBus Support:eg Profibus, DeviceNet etc Hot Standby Support
FS40 Series	10x RS232 and 2x RS485	2x Ethernet	1x Lonworks	FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etc Hot Standby Support
SlotServer	1x RS232/485	1x Ethernet	1x Lonworks	For Rockwell ControlLogix 5600