Chipkin.com

Navigation
CAS Modbus TCP Parser.

Have you ever needed to analyze a series of Modbus TCP message?
CAS Modbus TCP Parser

CAS Modbus RTU Parser.

Have you ever needed to analyze a Modbus RTU message?
CAS Modbus RTU Parser

CAS BACnet Explorer

Do you want to know more about your BACnet device on your network ?
CAS BACnet Explorer

Subscribe to our Newsletter
Name
E-mail Address

Canatal Data Conversion

Up one level

With the ability to read and write data to most Canatal units, the FieldServer driver can be used to connect Canatal chillers to remote systems for Building and/or industrial automation. Multiple units can be connected on a single trunk cable. Once connected to a FieldServer, you can utilize any other FieldServer driver to connect the chillers to a remote system. In addition to interfacing to remote systems, FieldServers can be deployed as web servers and we have developed a number of web page interfaces, customized for various customers, that allow monitoring and control.

 

Convert

 

We have module solutions which allow integration directly into Canatal products as well as the stand alone solutions shown bottom right.

 

Range of Conversion Solutions

 

Depending on project requirements select from units with varying resources. and multi port devices. OEM and embedded solutions too.

 

    FS20 Series 1x RS232/485 1x Ethernet 1x Lonworks
    FS25 Series
    		 2x RS232/485 1x Ethernet
    FS30 Series
    		 2x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support:eg Profibus, DeviceNet etc
    Hot Standby Support
    FS40 Series
    		 10x RS232 and 2x RS485 2x Ethernet 1x Lonworks FieldBus Support: eg DH+, MB+, Profibus, DeviceNet etc
    Hot Standby Support
    SlotServer
    		 1x RS232/485
    		 1x Ethernet 1x Lonworks For Rockwell ControlLogix 5600

    Lonworks and Fieldbus are options not proviced on base models.

 

Find your protocol

 

We have a huge list of protocols.

 

Block Diagram

 

FS30 series shown for purposes of illustration. Capability depends on hardware, firmware and configuration.

 

Chipkin Automation and Canatal

 

 

This  was developed by CAS for FST – Get exert support from day 1 with CAS.

CAS have provided 2nd tier tech support on behalf of Canatal and FST.

CAS have developed and deployed web interfaces for Canatal units.

 

 

Data Sheets and Manuals

 

 

- Data Sheet - FieldServer Driver - Serial - FS-8700-59 - Canatal Satchnet Driver

- Manual - FieldServer Driver - Serial - FS-8700-59 - Canatal Satchnet Driver

More Data Sheets...

 

 

Need Help

 

Canatal Web Site: www.canatal.com

Need more info ? Call or email us.

Metasys® as used in this document is a trademark of Johnson Controls, Inc.