CAS BACnet Explorer is the perfect utility for exploring, testing and debugging BACnet® networks and devices.
Exploring - Automatically discover all the BACnet® IP, BACnet® Ethernet and BACnet® MSTP devices, objects, and there properties on your network. The objects and devices are arranged in an easy to use tree format with braches for each network, object, […]
Did you like this post?
Subscribe To The RSS Feed!
To catch many more articles like this in the future, make it easy on yourself and subscribe to me via RSS. You will not regret it!
Do you have a question?
We will do our best to try and solve any building automation, protocol, integration problem you may have
BACnet is described by experts in the field as a data communication protocol for Building Automation and Control networks. Previous products were not able operate within another developer’s system or device. This aspect is referred to as interoperability. During the late 1980s, members of the American Society of Heating, Refrigerating, and Air Conditioning Engineers (ASHRAE) […]
Did you like this post?
Subscribe To The RSS Feed!
To catch many more articles like this in the future, make it easy on yourself and subscribe to me via RSS. You will not regret it!
Do you have a question?
We will do our best to try and solve any building automation, protocol, integration problem you may have
FieldServer Technologies has produced low-cost, quality ProtoCessors for the automation industry. ProtoCessors are Industrial Communication Protocol (ICP) modules with a standard interface. FieldServer ProtoCessors provide original equipment manufacturers (OEMs) expeditious implementation of various industrial, machine, and building automation protocols for the end-user.
The ProtoCessors are composed of an embedded system on a single board with an […]
Did you like this post?
Subscribe To The RSS Feed!
To catch many more articles like this in the future, make it easy on yourself and subscribe to me via RSS. You will not regret it!
Do you have a question?
We will do our best to try and solve any building automation, protocol, integration problem you may have
Published by Steven Smethurst May 4th, 2007
in BACnet MSTP and RS485.
I was ask this question to day
What would happen if you had two BACnet MSTP devices with different MAC address but the same BACnet Device ID (Node ID) on the same network and you send a Broadcast Who-is message.
This would be an illegal configuration ( no two devices shall have the same Device ID..) but […]
Did you like this post?
Subscribe To The RSS Feed!
To catch many more articles like this in the future, make it easy on yourself and subscribe to me via RSS. You will not regret it!
Do you have a question?
We will do our best to try and solve any building automation, protocol, integration problem you may have
Published by Steven Smethurst April 12th, 2007
in BACnet MSTP and RS485.
RS485 needs 3 conductors and a shield. Many people say its a two wire network but it is not.
Two conductors are used to carry the RS485 Differential voltage signal.
The Shield is connected to earth/ground at one end only and provides shielding against induced noise.
So why the 3rd conductor ?
The driver sends data by modulating the […]
Did you like this post?
Subscribe To The RSS Feed!
To catch many more articles like this in the future, make it easy on yourself and subscribe to me via RSS. You will not regret it!
Do you have a question?
We will do our best to try and solve any building automation, protocol, integration problem you may have