CAS Modbus TCP Parser
Have you ever needed to analyze a series of Modbus TCP message?
 CAS Modbus TCP Parser
CAS BACnet explorer
Do you want to know more about your BACnet device on your network ?
CAS BACnet Explorer
|
Driver Description
The Lutron eLumen Machine Zone/Area Machine driver, hereafter simply referred to as the Lutron Machine driver, provides a BACnet IP interface to a Lutron eLumen panel. The driver can be configured to represent either zones or areas as used in the Lutron eLumen panel. The FieldServer acts as both client and server to provide BACnet objects to an external BACnet client. In server mode, the FieldServer collects data from the eLumen panel and holds the data ready for reads from an external BACnet client. In client mode, the FieldServer executes pre-defined commands on the eLumen.
| FieldServer Model |
Nodes |
Comments |
| Client |
1 |
Only one Lutron Machine driver client node may be connected to a Lutron eLumen panel. |
| Server |
1 |
One BACnet IP node provides an upstream interface to the Lutron eLumen panel. |
Formal Driver Type
Compatibility Matrix
| FieldServer Model |
Compatible with this driver |
| FS-B2010 |
Yes |
| FS-B2011 (LonWorks) |
Yes |
| FS-B40 Series |
Yes |
Connection Information
| Connection type: |
RS-232, RS-485 |
| Baud Rates: |
9600 |
| Data Bits: |
8 |
| Stop Bits: |
1 |
| Parity: |
None |
| Multidrop Capability: |
No |
Devices tested:
| Device |
Tested (FACTORY, SITE) |
| Lutron Grafik 6000 |
Site |
Connection configurations
Communications functions - Supported functions at a glance:
Data Types Supported
| FieldServer Data Type |
Description (or Device Data Type) |
| Analog Input |
Zone Intensity, Last Scene number |
| Binary Input |
Relay status, Scene on status |
| Analog Output |
Desired Intensity, Desired Scene, Scripts |
| Binary Output |
Scripts |
| Multistate Output |
Scripts |
| Analog Value |
System variables |
| Binary Value |
System variables |
Read and Write operations supported
| FieldServer as a Client |
FieldServer as a Server |
| Read Analog Input Status: | Provide Analog Input Status: |
| Get Zone Intensity, | Get Area Status Get Zone Intensity, Get Area Status |
| Read Binary Input Status: | Provide Binary Input Status: |
| Get Zone Intensity, | Get Area Status Get Zone Intensity, Get Area Status |
| Read Analog Value Status: | Provide Analog Value Status: |
| Get System Variable Value | Get System Variable Value |
| Read Binary Value Status: | Provide Binary Value Status: |
| Get System Variable Value | Get System Variable Value |
| Write Analog Setpoints: | Accept Analog Setpoints: |
| Select Scene in Area, Run Script | Select Scene in Area, Run Script |
| Write Binary Commands: | Accept Binary Commands: |
| Run Script | Run Script |
Unsupported Functions and Data Types
| Function |
Reason |
| Programming messages |
FieldServer is a data transfer device, and as such, programming messages are not required |
|
Download adobe version
